Quick Answer: What Is Recommended Hot Water Temperature?

How hot is to hot for bath water?

The optimal temperature for shower water or bath water, so that it washes away environmental dirt and bacteria, is no higher than 112 degrees Fahrenheit, Cleveland Clinic dermatologist Melissa Piliang says.

Few things feel better than a hot soak on a cold day..

What is the ideal temperature for domestic hot water?

120 degrees FahrenheitThe Consumer Product Safety Commission (CPSC) recommends setting the water heater at no more than 120 degrees Fahrenheit (49 degrees Celsius) to prevent scalding. Not to mention, a water heater that is set too high can unnecessarily increase your electricity bill. Of course, every house is different.

What temperature should hot water be set at UK?

60 °CHot water should be stored at 60 °C at least in order to kill legionella bacteria. The thermometer pocket at the top of the cylinder and on the return leg, if fitted, is a useful point for accurate temperature measurement.

Is 50 degrees hot enough for hot water?

Water that is 57 degrees can cause a major burn within a few seconds. This highlights just how dangerous water can be over the 50 degree temperature mark even if it is only a few degrees. In the case of how hot is too hot, the absolute maximum should be 50 degrees for every appliance located in a bathroom area.

Is 140 too hot for water heater?

Professionals recommend keeping your water heater set at a temperature between 130 and 140 degrees Fahrenheit. Any higher, or lower, could actually be dangerous for you and your family. While turning the temperature up higher can result in burns, turning it lower than the recommended setting can also be dangerous.

What is the maximum temperature for a hot water heater?

120 degrees FahrenheitYou see, back in 1988, the Consumer Product Safety Commission recommended that water heater manufacturers preset the maximum temperature at 120 degrees Fahrenheit to prevent burns.

How do I make my hot water heater last longer?

3 Tips to Make Your Water Heater Last Longer and Work More EfficientlyFlush the water heater tank once a year. Almost all water heater manufacturers will recommend flushing the water heater tank annually. … Check the Anode Rod and Replace it if it’s Badly Corroded. … Insulate the Hot Water Heater Tank.

What is the minimum acceptable hot water temperature?

If you are going to use a hot water rinse, the water temperature must be at least 171°F and the items must remain submerged for a minimum of 30 seconds.

Is 150 too hot for water heater?

The recommended setting for household water heaters is not 150 degrees, but slightly less _ 140 degrees. At that temperature, the water is hot enough to clean dishes and provide a steamy shower, but not so hot that it’s dangerous.